王秀鳳、李衛東編著的《冷衝壓模具設計》介紹
：Based on the author's rich teaching and
practical experience， this textbook is an
accumulated effort to in-troduce the basic
knowledge of cold or room temperature
stamping die design systematically and
comprehen-sively. For the most
representative blanking die， the stamping
die design process， structure type
selection， de-sign steps and the main
process calculation are described in details
， and then the characteristics of the
bending die， drawing die and flanging die
are explained further. In addition， common
cold stamping die design data and standard
parts for inspection were included in order
to facilitate student curriculum design and
to engineering personnel for reference.
This textbook is written for
international students and domestic
undergraduates majoring in mechanical
engineering. The accompanying multimedia CAI
courseware is made to assist teaching.

Chapter 1 Introduction
1.1 Concept and application of cold stamping die
1.2 History and situation of cold stamping die
1.3 Classification of cold stamping die
Questions
Chapter 2 Blanking Die Design
2.1 Foundation of blanking die design
2.1.1 Technological characteristics of the blanking workpiece
2.1.2 Analysis of the blanking process
2.1.3 Technological calculation of the blanking workpiece
2.1.4 Related calculation in the blanking die design
2.2 Typical structure of blanking die
2.2.1 Basic type and construction of blanking die
2.2.2 Construction of main parts of the cold stamping die
2.2.3 Complex blanking die
Questions
Chapter 3 Bending Die Design
3.1 Foundation of bending die design
3.1.1 Technological characteristics of the bending workpiece
3.1.2 Analysis of bending process and deformation
3.1.3 Technological calculation of the bending workpiece
3.1.4 Related calculation in the bending die design
3.2 Typical structure of bending die
3.2.1 Typical structure of the bending die
3.2.2 Process steps for complex bending workpiece
3.2.3 Structure design keys of bending die design
Questions
Chapter 4 Drawing Die Design
4.1 Foundation of drawing die design
4.1.1 Characteristics of the drawing workpiece
4.1.2 Analysis of drawing process and deformation
4.1.3 Technological calculation of the drawing workpiece
4.1.4 Related calculation in the drawing die design
4.2 Typical structure of drawing die
Questions
Chapter 5 FlangingDieDesign.
5.1 Foundation of flanging die design
5.1.1 Technological characteristics of the flanging workpiece
5.1.2 Analysis of flanging process and deformation
5.1.3 Technological calculation of the flanging workpiece
5.1.4 Related calculation in the flanging die design
5.2 Typical structure of flanging die
Questions
Chapter 6 Design Process of Cold Stamping Die
6.1 General steps of cold stamping die design
6.1.1 Obtain workpiece information and analyze the characteristic of stamping
process
6.1.2 Determine the technologic scheme and the stamping die structure
6.1.3 Carry out necessary technologic calculation
6.1.4 Designtheoveralldie