第3版前言Preface of the Third Edition
第2版前言Preface of the Second Edition
**版前言Preface of the First Edition
第1章 緒論 Chapter 1 Introduction
1.1 钎焊方法的原理和特點Principle and Characteristic of Brazing and Soldering Technique
1.2 熔態钎料對固體母材的潤濕和鋪展Wetting and Spreading of Molten Filler Metal on a Solid Base Metal
1.2.1 固體金屬的表面結構The Surface Structure of Solid Metal
1.2.2 熔態钎料與固體母材的潤濕Wetting of Molten Filler on Solid Base Metal
1.2.3 熔態钎料在钎劑(第二液體)中與母材間界面張力的變化Change of Interfacial Tension between Molten Filler and Base Metal Immersed in a Fused Flux(a second liquid)
1.2.4 金屬母材表面的氧化膜及其去除機制Oxide Film on Base Metal and its Removal Mechanism
1.2.5 熔態钎料在固體母材上的鋪展Spreading of Molten Filler Metal on Solid Base Metal
1.3 熔態钎料與固體母材的相互作用Reaction of Molten Filler with Solid Base Metal
1.3.1 熔態金屬與固體金屬的相互作用Reaction of Molten Metal with Solid Metal
1.3.2 钎料的構成Construction of Filler Metals
1.3.3 熔態钎料在母材間隙中的流動和钎縫結構的不均勻性Flowing of Molten Filler Metal in the Clearance of Base Metals as well as Inhomogeneity of the Formed Fillet
1.3.4 熔析與熔蝕Liquation and Erosion
1.4 钎縫中熔態钎料的凝固和钎縫的金相組織Solidification of Molten Filler Metal in Clearance and the Micrographic Structure of the Fillet
1.4.1 共晶钎縫組織The Structure of Eutectic Fillet
1.4.2 晶間滲透組織The Fillet Structure with Intercrystalline Penetration
1.4.3 有化合物生成的钎縫組織The Fillet Structure with Intermetallics
1.5 钎劑、钎料的選擇與搭配Selection and Matching of Fluxes with Filler Metals
1.5.1 钎劑的選擇Selection of Fluxes
1.5.2 钎料的選擇Selection of Filler Metals
1.5.3 钎劑和钎料的搭配Matching of Filler Metal with Flux
1.6 钎焊工藝Technology of Brazing and Soldering
1.6.1 接頭的形式與钎料在钎縫中的流動性Joint Types and Flowability of Molten Filler Metal in the Clearance
1.6.2 加熱方法Methods for Heating
1.6.3 工件的升溫速度和冷卻速度Heating and Cooling Rate of Workpieces in Brazing Process
1.6.4 钎焊接頭的保溫處理和結構的彌散Annealing for Brazed Joints and Structure Dispersion in the Fillet
參考文獻 References
第2章 鋁及鋁合金的钎焊 Chapter 2 Brazing and Soldering of Aluminum and its Alloys
2.1 概述Introduction
2.2 鋁及鋁合金的編號Designations of Aluminum and its Alloys
2.3 鋁及鋁合金的理化性能Physical and Chemical Properties of Aluminum and its Alloys
2.3.1 鋁及鋁合金的物理性能Physical Properties of Aluminum and its Alloys
2.3.2 鋁及鋁合金的化學性能Chemical Properties of Aluminum and its Alloys
2.4 鋁氧化膜的本質及其在加熱時的變化Nature of Oxide Film on Aluminum and its Change during Heating
2.5 鋁钎劑Fluxes for Aluminum Brazing and Soldering
2.5.1 鋁的硬钎劑Fluxes for Aluminum Brazing
2.5.2 鋁的軟钎劑Fluxes for Aluminum Soldering
2.6 钎焊時鋁氧化膜的脫除機制Removal Mechanism of Oxide Film on Aluminum during Brazing
2.6.1 鋁氧化膜與熔鹽钎劑的相互作用Interaction of Oxide Film on Aluminum with Molten Salt Flux
2.6.2 真空環境下金屬蒸氣對鋁氧化膜的破壞Disruption of Oxide Film on Aluminum by Metal Vapor in Vacuum Environment
2.7 鋁钎料Brazing Filler Metals and Solders for Aluminum Alloys
2.7.1 Al-Si繫钎料(液相線溫度範圍570～630°C)Filler Metals of Al-Si Series(melting range 570～630°C)
2.7.2 Al-Si-Cu-Zn繫钎料(液相線溫度範圍500～577°C)Filler Metals of Al-Si-Cu-Zn Series(melting range 500～577°C)
2.7.3 Al-Cu-Ag-Zn繫钎料(液相線溫度範圍400～500°C)Filler Metals of Al-Cu-Ag-Zn Series(melting range 400～500°C)
2.7.4 Al-Ge-Si繫钎料(液相線溫度範圍425～500°C)Filler Metals of Al-Ge-Si Series (melting range 425～500°C)
2.7.5 Zn-Al繫钎料(液相線溫度範圍382～400°C)Solders of Zn-Al Series(melting range 382～400°C)
2.7.6 Cd-Zn繫钎料(液相線溫度範圍265～350°C)Solders of Cd-Zn Series(melting range 265～350°C)